Nokia 6310i Specification

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

xer0w - 16 Oct 2003 18:39 GMT

Hi,

Does anyone know how I can find out if my 6310i is Bluetooth v1.1
specification?
I guess it's to do with the Firmware revision but I don't know what
versions are 1.1 specification compliant.

Reply to this Message

G - 16 Oct 2003 20:09 GMT

Technically, if its a 6310i it's bluetooth 1.1 compliant. Realistically, if
the firmware is before v5.50 you'll have a bugger getting it to work with
most things that aren't headsets (*#0000# to check firmware version).

> Hi,
>
> Does anyone know how I can find out if my 6310i is Bluetooth v1.1
> specification?
> I guess it's to do with the Firmware revision but I don't know what
> versions are 1.1 specification compliant.

Reply to this Message

xer0w - 17 Oct 2003 20:09 GMT

Ok, thanks for the information.
I'm soon to be trying it out on a new BMW incar Media Interface, BMW have
told me that any phone used to pair with must be v1.1 specification, this
ensures that the phone book can be uploaded and calls can be made from the
Steering Wheel controls.

I am prepaired to buy another phone if my 6310i is not fully bluetooth v1.1
compliant, but I'm finding it very hard getting information on which
phone's are :-(

Can anyone recommend a phone that is considered to be 100% v1.1
specification compliant ?

Regards.

> Technically, if its a 6310i it's bluetooth 1.1 compliant. Realistically,
> if the firmware is before v5.50 you'll have a bugger getting it to work
[quoted text clipped - 6 lines]
>> I guess it's to do with the Firmware revision but I don't know what
>> versions are 1.1 specification compliant.

Reply to this Message

G - 18 Oct 2003 12:44 GMT

I'd hazard a fairly confident guess that the 6310i will work with your
handsfree "media interface" for the voice calls, but I doubt it'll support
interfacing with the phone book. If you've already got the car and the phone
it won't hurt to try it though. It'll probably support voice dialling
directly with the phone though, but the downside is its using the phones'
voice tags rather than the kits' , so you only get 10 or so voice tags that
the phone supports.

I'm not sure about other phones that'll work ('cause I only have a 6310i
myself), but I think the Sony Ericsson T68i or P800 should work with it, as
I've seen that they'll support phonebook interfacing with things like the
Parrot Driveblue handsfree car kits. Bluetooth Motorola models should work
too. No nokias spring to mind though (which is a shame, 'cause I prefer the
nokias myself!).

You should at least be able to make calls with it though. Good luck trying.

> Ok, thanks for the information.
> I'm soon to be trying it out on a new BMW incar Media Interface, BMW have
[quoted text clipped - 21 lines]
> >> I guess it's to do with the Firmware revision but I don't know what
> >> versions are 1.1 specification compliant.

Reply to this Message

Dolphin Boy - 20 Oct 2003 08:58 GMT

http://qualweb.bluetooth.org/Template2.cfm

Here you can find details of which products are qualified, what
profiles they support, & who tested them. HTH

Reply to this Message

xer0w - 24 Oct 2003 01:50 GMT

Hey, thanks, that's just what I was looking for.
BTW, if anyone is looking for a box solution for their car:
http://www.driveblue.com

> http://qualweb.bluetooth.org/Template2.cfm
>
> Here you can find details of which products are qualified, what
> profiles they support, & who tested them. HTH

Reply to this Message

gerry - 16 Oct 2003 22:16 GMT

I can inform you that it will not work with belkins Bluetooth adapter and on
there website they say that it does not work with most other brands of
Bluetooth! as I found out after 3 hrs of trying to get it to work.

Reply to this Message

Adrian Stuart - 17 Oct 2003 15:55 GMT

I Have to disagree with Gerry.

I have had a 6310i working with a Belkin dongle for some time now. However as previosly mentioned the phone will have to be running
firmware ver. 5.5

Adrian

> I can inform you that it will not work with belkins Bluetooth adapter and on
> there website they say that it does not work with most other brands of
> Bluetooth! as I found out after 3 hrs of trying to get it to work.

Reply to this Message

- 19 Oct 2003 17:21 GMT

I have a new 6310i and am trying to connect with tmy Vaio laptop Z1MP. It
connects and authorises and then instantly disconnects. It then connects and
disconnects instantly at every attempt ?
Any ideas ?? The firmware is 5.51

Thanks

> I Have to disagree with Gerry.
>
[quoted text clipped - 6 lines]
> > there website they say that it does not work with most other brands of
> > Bluetooth! as I found out after 3 hrs of trying to get it to work.

Reply to this Message

G - 20 Oct 2003 07:34 GMT

Can't help as I've never used the bluetooth stack that the vaio's use, but
there are a few threads elewhere about this that may help, see;

http://www.expansys.com/forumthread.asp?code=6310i&thread=12

http://groups.google.co.uk/groups?hl=en&lr=lang_en&ie=UTF-8&oe=UTF-8&safe=off&th
readm=3ecd30fc%240%247750%24fa0fcedb%40lovejoy.zen.co.uk&rnum=1&prev=/groups%3Fn
um%3D30%26hl%3Den%26ie%3DUTF-8%26oe%3DUTF-8%26safe%3Doff%26q%3D6310i%2Bvaio%26sa
%3DN%26tab%3Dwg

Good luck.

> I have a new 6310i and am trying to connect with tmy Vaio laptop Z1MP. It
> connects and authorises and then instantly disconnects. It then connects and
[quoted text clipped - 17 lines]
> > > there website they say that it does not work with most other brands of
> > > Bluetooth! as I found out after 3 hrs of trying to get it to work.

Reply to this Message