> Hello,
>
[quoted text clipped - 7 lines]
> I'm wondering if perhaps the IMEI is blocked or something. I'm using a
> Rogers AT&T SIM btw.
If you've debranded it incorrectly there's a good chance the IMEI has become
corrupt. What did you use to flash the phone and in what order did you
flash the parts (MCU, Modem & GDFS) of the firmware?
>>> Unlock Your Phone's Potential <<<
>>> www.uselessinfo.org.uk <<<
>>> www.thephonelocker.co.uk <<<
>>> www.gsm-solutions.co.uk <<<
Sarf - 22 Dec 2004 17:53 GMT
I unlocked and debranded it in the saem order I did my SE T637, which works
fine.
I used DIV5.
First I unlocked it(checkbox in DIV), then re-wrote with an uncustomized
GDFS. Didn;t touch teh modem on either fone.
Corrupted IMEI? You mean like the internal IMEI that the cellular sends as
its ID to the network? Hmmmn...
Worse comes to worst, I was tempted to change teh IMEI, but then I hit a new
brick wall, in what new IMEI I could use so as not to cause any ripples in
the network...(Wow! A ghost/clone IMEI! =-P)
>> Hello,
>>
[quoted text clipped - 16 lines]
>>>> www.thephonelocker.co.uk <<<
>>>> www.gsm-solutions.co.uk <<<
Sarf - 22 Dec 2004 18:33 GMT
Actually, what order would you suggest ?
Thx!
_____
Sarf
=-)
>> Hello,
>>
[quoted text clipped - 16 lines]
>>>> www.thephonelocker.co.uk <<<
>>>> www.gsm-solutions.co.uk <<<
Richard Colton - 22 Dec 2004 20:28 GMT
> Actually, what order would you suggest ?
MCU, Modem then GDFS, and I'd also flash them one at a time removing the
battery between flashing each part.
>>> Unlock Your Phone's Potential <<<
>>> www.uselessinfo.org.uk <<<
>>> www.thephonelocker.co.uk <<<
>>> www.gsm-solutions.co.uk <<<
Sarf - 23 Dec 2004 05:55 GMT
Will try this. Thank you. An interesting point though.. I just passed by a
FIDO store, adn asked them to "see if I can use thsi phoen n teir
network"(It originally was a FIDO phone). I saw the chicks put a SIM in
there, but never saw them make any test calls with it. They said, Its good
on FIDO's network... I'm curious as to if they really checkd it or not. I
mumbled that I had unlocked it. They also told me it was unlocked..duh.
I will try the order you suggested, and will keep you posted.
Thanks!!
_____
Sarf
=-)
>> Actually, what order would you suggest ?
>
[quoted text clipped - 5 lines]
>>>> www.thephonelocker.co.uk <<<
>>>> www.gsm-solutions.co.uk <<<
Sarf - 23 Dec 2004 21:19 GMT
Okaaay.
Woukld you mind please listing the order in which the *files* should be
flashed? I have *.SBN and *.GDF files.
Thanks Richard.
_____
Sarf
=-)
> Will try this. Thank you. An interesting point though.. I just passed by
> a FIDO store, adn asked them to "see if I can use thsi phoen n teir
[quoted text clipped - 21 lines]
>>>>> www.thephonelocker.co.uk <<<
>>>>> www.gsm-solutions.co.uk <<<
Richard Colton - 24 Dec 2004 21:10 GMT
> Okaaay.
>
> Woukld you mind please listing the order in which the *files* should be
> flashed? I have *.SBN and *.GDF files.
Bear in mind that I don't use Terminator or DIV (I use Twister), but the
.GDF files are (surprisingly) the GDFS and should be flashed last of all,
and you should be able to tell from the file names what the .SBN files are
(MCU or Modem).
If you get stuck, have a look on the forums at http://beam.to/gsmforum
HTH
>>> Unlock Your Phone's Potential <<<
>>> www.uselessinfo.org.uk <<<
>>> www.thephonelocker.co.uk <<<
>>> www.gsm-solutions.co.uk <<<