Hello,
I have an SE T310 and a Sony CLie SJ22 running Palm OS 4.1. I am
trying to connect to Fido GPRS using IrDA. I have searched for days
and tried many different ways to connect my palm to the internet.
Every time I try to connect, I get a message on my phone saying "GPRS
Parameters Not Supported" My configuration is as follows:
Connection:
Name: Wireless
Connect to: PC
Via: Infrared
Speed: 57,600
Flow: Ctl off
Network:
Service: Fido GPRS
Username: fido
Password: fido
Connection: Wireless
Connection type: PPP
Idle timeout: Never
Query DNS: Checked
IP Address: Checked
Script:
Send atz
Send CR
Send at+cgdcont=1,"IP","internet.fido.ca","0.0.0.0",0,0
Send CR
Send at+cgqreq=1,0,0,0,0,0
Send CR
Send atd*99#
Send CR
End
I have tried many different setups that I have found in newsgroups and
I always get the same message "GPRS Parameters Not Supported"
If someone could help me out, I would greatly appreciate it. Thank
you
rick.david AT infotouch DOT net
repatch - 25 Nov 2003 20:48 GMT
Sounds like you don't have GPRS enabled on your account, that's the message
I got until I enabled GPRS on my account. TTYL
> Hello,
>
[quoted text clipped - 43 lines]
>
> rick.david AT infotouch DOT net
repatch - 25 Nov 2003 20:52 GMT
If you do have GPRS enabled try changing the dialed number to *99***1#. TTYL
> Hello,
>
[quoted text clipped - 43 lines]
>
> rick.david AT infotouch DOT net
Rick David - 26 Nov 2003 21:51 GMT
> If you do have GPRS enabled try changing the dialed number to *99***1#. TTYL
I do have GPRS enabled, and I tried using that number. I still get
the same message.
> > Hello,
> >
[quoted text clipped - 43 lines]
> >
> > rick.david AT infotouch DOT net