 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General General TopicsGSMBluetoothProviders AlltelATT WirelessCingularFidoNextelSprint PCST-MobileVerizonManufacturers EricssonNokiaMotorolaCountry Specific Australian GroupUK GroupRelated Topics PocketPCPalmMore Topics ... |
Cellular Phone Forum / General / GSM / March 2006nokia n70 and at+cmgl=all
hi, why if i send AT+CMGL=ALL to my nokia n70 he give me: ERROR??? with my nokia 6600 give me a list of all sms in memory Simo > hi, why if i send AT+CMGL=ALL to my nokia n70 he give me: > ERROR??? > > with my nokia 6600 give me a list of all sms in memory The correct syntax is AT+CMGL="ALL" with quotes around the command argument (GSM 07.05). This is the text-mode form of the syntax, and will generate an "ERROR" message if the device is in PDU-mode. Use AT+CMGF? to test the currently-set mode, and AT+CMGF=1 to enter text-mode. The equivalent PDU-mode command (read all messages) is AT+CMGL=4 (no quotes). John i try but don't work... AT+CMGF=1 is OK but if i try AT+CMGL=ALL or AT+CMGL=4 give me error... also i try to set SIM CARD OR MEMORY CARD but the AT+CPMS give me ( ), ( ), ( ), ( ) without data inside... Simo >> hi, why if i send AT+CMGL=ALL to my nokia n70 he give me: >> ERROR??? [quoted text clipped - 24 lines] > > John > i try but don't work... > [quoted text clipped - 6 lines] > to set SIM CARD OR MEMORY CARD but the AT+CPMS give me ( ), ( > ), ( ), ( ) without data inside... Which "AT+CPMS" syntax variant? What do AT+CPMS=? and AT+CMGL=? return (in text-mode)? What's the exact syntax of "AT+CMGL" that you're using in text-mode? Can you log the session with Hyperterminal and post the results? AT+CMGL=4 should work after AT+CMGF=0 (PDU-mode) and AT+CMGL="ALL" should work after AT+CMGF=1 (text-mode). But note the quotes and the upper-case. These can be crucial with many devices. John here the answer: at OK AT+CPMS=? +CPMS: (),(),() OK AT+CMGL=? ERROR AT+CMGF=1 OK AT+CMGL=? ERROR AT+CMGF=0 OK AT+CMGL="ALL" ERROR AT+CMGL=? ERROR AT+CMGF=1 OK AT+CMGL=4 ERROR > here the answer: > > at > OK > AT+CPMS=? > +CPMS: (),(),() This doesn't look good. The list of supported memories is empty. > OK > AT+CMGL=? > ERROR I'm sorry, but this means that "AT+CMGL" isn't supported by this device. To me, this doesn't sound right for a Symbian device. Do you have an "AT Command Set" manual for this phone? Is there some other command necessary to enable ordinary GSM/3G commands? I found a Nokia manual at http://tinyurl.com/agvs2 - it says the typical response to AT+CPMS=? should be: +CPMS: ("ME","SM"),("ME","SM"),("MT") John i can't found the manual at command for this phone, where is the web?? Simo >> here the answer: >> [quoted text clipped - 29 lines] > > John > i can't found the manual at command for this phone, where is > the web?? Click on the file name near the top of that page: AT_Command_Set_For_Nokia_GSM_And_WCDMA_Products_v1_2_en.pdf John I wrote: > I found a Nokia manual at http://tinyurl.com/agvs2 According to that manual, the default setting for "AT+CFUN" is zero (minimum functionality). That being the case, you might need to do AT+CFUN=1 to enable full functionality. You might also need to investigate the "AT+CPIN" command to see if you're being blocked by PIN security. John thanks a lot... i will try Simo >I wrote: > [quoted text clipped - 12 lines] > > John Hi, i try to use AT+CFUN=1 and AT+CFUN=1,1 the phone will be reset but don't work AT+CMGL="ALL" Simone |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.