 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General General TopicsGSMBluetoothProviders AlltelATT WirelessCingularFidoNextelSprint PCST-MobileVerizonManufacturers EricssonNokiaMotorolaCountry Specific Australian GroupUK GroupRelated Topics PocketPCPalmMore Topics ... |
Cellular Phone Forum / Providers / Nextel / August 2003I90c charging
I have a I90c that is about 4 months old. The home charger is a NNTN4250A. When using this 110volt charger it doesnt seem to always want to charge the phone. I usually have to plug it in 4 or 5 times and turn the phone off and on before some magic combination happens to make it start charging. None of the pins on the charger or phone seem to be bent or corroded. Anyone else have these problems? Tom > I have a I90c that is about 4 months old. The home charger is a > NNTN4250A. When using this 110volt charger it doesnt seem to always [quoted text clipped - 3 lines] > to be bent or corroded. Anyone else have these problems? > Tom No problems exactly like that here, but I've had to swap an i90 and several i1000 phones out for new ones at the service center. If you bought yours new you might want to see if you can do an in warranty swap with the dealer you purchased it from or go to a service center. I just got a new i90c today & the charger says NNTN4250B. > I have a I90c that is about 4 months old. The home charger is a > NNTN4250A. When using this 110volt charger it doesnt seem to always [quoted text clipped - 3 lines] > to be bent or corroded. Anyone else have these problems? > Tom Ben, Do me a favor please. Look at your new charger. Look at the end that plugs into the phone. Does that end have about 3 prongs that are not all at the same height? I I I I I I II I And if you have the car charger, are all the prongs the same height? Thanks Tom >I just got a new i90c today & the charger says >NNTN4250B. [quoted text clipped - 6 lines] >> to be bent or corroded. Anyone else have these problems? >> Tom Tom, the charger has two prongs that fold in. As far as the car charger, I'll let you know when I get to my car. I've never really checked that stuff before. > Ben, > Do me a favor please. Look at your new charger. Look at the end that [quoted text clipped - 16 lines] > >> to be bent or corroded. Anyone else have these problems? > >> Tom Tom, your battery might be bad already. I have one old Moto i85 which dos not hold charge. Pacificwoods > I have a I90c that is about 4 months old. The home charger is a > NNTN4250A. When using this 110volt charger it doesnt seem to always [quoted text clipped - 3 lines] > to be bent or corroded. Anyone else have these problems? > Tom Pacific, Now you werent following along, were you? The battery has nothing to do with my problem. If I plug it into the cigarette lighter adapter, everything works perfectly. The Nextel authorized service center agent I took it to said the phone is the problem and it needs to be replaced in warranty. Too bad that "kid" has no clue. He should look for another job. What I have found out is that if you have the NNTN4250A charger (NOTE THE A) you need to send it back. Its an old (I say old again) piece of crap. You will get a NNTN4250B (Note the B) charger. My phones were purchased in Feb of this year along with the rapid travel chargers they came with (NNTN4250B) The Motorola rep said that charger is well over a year old and not under warranty. I told him "Wrong Bucko"! I have the receipt in front of me. He is sending out two new chargers (Both I90c phones and chargers are doing this) under warranty as long as I send the old ones back with proof of purchase. Obviously they tried to get rid of some old stock. Suprise, suprise. Tom >Tom, your battery might be bad already. I have one old Moto i85 which dos >not hold charge. Pacificwoods [quoted text clipped - 5 lines] >> to be bent or corroded. Anyone else have these problems? >> Tom Hrmmm, my charger is Model: PSM4716A IS THAT GOOD OR BAD? ;-) > Pacific, > Now you werent following along, were you? The battery has nothing to [quoted text clipped - 25 lines] >>>to be bent or corroded. Anyone else have these problems? >>>Tom > I have a I90c that is about 4 months old. The home charger is a > NNTN4250A. When using this 110volt charger it doesnt seem to always [quoted text clipped - 3 lines] > to be bent or corroded. Anyone else have these problems? > Tom Yes, just clean the contacts with q-tips and alcohol.  Signature8/16/2003 9:00:43 AM >> I have a I90c that is about 4 months old. The home charger is a >> NNTN4250A. When using this 110volt charger it doesnt seem to always [quoted text clipped - 5 lines] > >Yes, just clean the contacts with q-tips and alcohol. Already tried that. It worked for about 5 mins then back to the same thing. The rapid travel charger in the <A> series is a lemon. Tom As weird as it sounds, it appears my charging issues are somehow related to firmware updating. Never had a problem prior to recent updates it seems... Coincidence? Sometimes also get a message on the screen that I'm using an incompatible charger, which I am not. Sometimes the phone powers off on me. Grrr.... >>>I have a I90c that is about 4 months old. The home charger is a >>>NNTN4250A. When using this 110volt charger it doesnt seem to always [quoted text clipped - 9 lines] > thing. The rapid travel charger in the <A> series is a lemon. > Tom |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.