> I do not see any any info about this in the User manual.

Signature
Posted via a free Usenet account from http://www.teranews.com
>> Reference:
>> UN-activated AudioVox PPC-6700...
[quoted text clipped - 25 lines]
>signal strength indicator and selecting flight mode. Then the power off
>button will behave more like a typical PPC.
OK - Now I understand what is happening here. Cool !
However, I do like the entire phone to be "off" before I go
to bed.
I recently discovered this alternate method to do an
OFF-event.
Observe that in the lower-left corner is a RED Phone button
(this button also has a tiny unexplained "POWER-OFF" symbol
on it)
While the 6700 is still ON, Press and Hold the RED Phone
button until you hear a low-pitched "DONG-NG-NG" sound.
Next, at the top of the screen both the Internet symbol
(displays either '1X' or 'EV'), and the Signal Strength
symbol will now also have a tiny "X" next to each of them.
NOW, the 6700 will not receive or originate any calls, this
seems to be a key-stroked similarity to the Flight Mode,
and if your phone is (most likely) on Battery Power, leaving
the phone in this condition, depending upon your customized
Battery Power settings, will cause the 6700 to eventually
completely shut down, and Power-OFF.
After doing that, to initiate another Power-On, you must
press the top-mounted Power Button until the screen light
turns-ON; at this time you can use the PDA functions.
Next, do Press-and-Hold that same RED Phone button until
you hear a short "upbeat-sound".
These actions will then restore the 6700 back to a full
PHONE Power-On condition, and ready to again resume
receiving and originating calls.
This PPC-6700 is a pure geek's delight.
This 67-year-old non-geek absolutely LOVES this phone!
The Microsoft Mobile op system does not seem to be "quirky"
as the Palm OS often is.
The PPC-6700 now allows me to carry only ONE device,
instead of a "regular" cell phone, and PDA.
While my wife & I are shopping at the Mall, I can sit down
somewhere and "play" the free Wi-Fi and Internet!!
Meanwhile she can still contact me with her Sprint PCS cell
phone.
Fantastic!!! ---Juan
Paul Miner - 20 Apr 2007 19:57 GMT
>OK - Now I understand what is happening here. Cool !
>However, I do like the entire phone to be "off" before I go
>to bed.
My wife sometimes turns her phone off at night, but I never understood
that. First of all, if you need your phone during the night, it'll
most likely be because there's an emergency, whether medical, house
fire, or whatever. Most people don't sit up in bed in the middle of
the night and decide to make a casual call. Second, since it's at
night, it'll be dark, so you're more likely to be fumbling around,
trying to find your phone and get it turned on. Third, in over 50
years of having a landline, I never went around the house and
unplugged the phones to keep them from ringing, so I don't quite get
the concept of turning the phone off at night. <G>

Signature
Paul Miner
Todd Allcock - 20 Apr 2007 20:13 GMT
> I recently discovered this alternate method to do an
> OFF-event.
[quoted text clipped - 16 lines]
> Battery Power settings, will cause the 6700 to eventually
> completely shut down, and Power-OFF.
Interesting. I have the GSM version of that phone, and holding down the
red button disconnects the data connection but never turns off the phone
radio. (Mine also lacks a power-off symbol.)
> After doing that, to initiate another Power-On, you must
> press the top-mounted Power Button until the screen light
[quoted text clipped - 4 lines]
> PHONE Power-On condition, and ready to again resume
> receiving and originating calls.
Cute. I have to tap the on-screen signal strength icon and toggle flight
mode in the dialog balloon that displays (or deactivate each radio
individually in connection manager.)
> This PPC-6700 is a pure geek's delight.
>
[quoted text clipped - 8 lines]
> phone.
> Fantastic!!! ---Juan
Yeah, I could never go back to two separate devices again, even though
using a phone with the touchscreen as the main dialing interface is a
little akward.